show isis neighbor

---

Displays information about IS-IS neighbors.

Syntax: show isis neighbor

Description: Displays the information about IS-IS neighbors.

Factory Default: None.

Command Mode: Executive and privileged.

Example 1: The following is sample output from the show isis neighbor command:

router#show isis neighbor System ID SNPA Interface State HoldTime Type Pri 1000.5000.0002 CL 12 Up 101 L1 . . .

Example 2: The following is sample output of the show isis neighbor when hostname dynamic is enabled:

router#show isis neighbor System ID SNPA Interface State HoldTime Type Pri NPIshelf2 CL 12 Up 101 L1

NPIshelf3 POS 1/6/1 Up 97 L1

Table 3-7. Fields Displayed by show isis neighbor 

Field	Description
System ID	The system identifier of the neighboring system, in either xxxx.xxxx.xxxx or hostname format.
SNPA	The neighbor's MAC address on a broadcast network.
Interface	The interface over which the adjacency was established.
State	The state of the neighboring router.
HoldTime	How many seconds until the adjacency is deleted (unless it is reset).
Type	The type of adjacency. Types can be either L1 for Level 1 or L2 for Level 2.
Priority	The priority assigned to each router.

Related Commands: hostname dynamic
show isis
show isis database
show isis hostname
show isis interface
show isis topology

Copyright © 2004 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: ISIS.fm
    HTML File Name: ISIS48.html
    Last Updated: 05/10/04 at 16:35:45

Please email suggestions and comments to: doc@avici.com