show isis topology

---

Displays a list of all connected routers in all areas.

Syntax: show isis topology

Description: Displays list of all connected Level-2 (inter-area) routers in all areas.

Factory Default: None.

Command Mode: Executive and privileged.

Example: The following is sample output of the show isis topology command:

router#show isis topology IS-IS paths to level-2 routers System Id       Metric  Next-Hop        Interface SNPA 0102.5400.5001 10 0102.5400.5001 PO0/0/0 0102.5400.5003 20 0102.5400.5001 PO0/0/0 0102.5400.5004 --

The following table describes the fields in the display:

Table 3-11. Fields Displayed by show isis topology 

Field	Description
System ID	The system identifier of the neighboring system.
Metric	A relative cost for sending information over this interface.
Next-Hop	The system identifier of the next hop from the neighboring system.
Interface	The interface over which the adjacency was established.
SNPA	The neighbor's MAC address on a broadcast network.

Related Commands: hostname dynamic
show isis database
show isis hostname
show isis interface
show isis neighbor

Copyright © 2004 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: ISIS.fm
    HTML File Name: ISIS52.html
    Last Updated: 05/10/04 at 16:35:45

Please email suggestions and comments to: doc@avici.com