[Top][Contents][Prev][Search]

Index


A


Access-Accept

code field packet type

Access-Challenge

code field packet type

Access-Password-Ack

code field packet type

Access-Password-Reject

code field packet type

Access-Password-Request

code field packet type

Access-Reject

code field packet type

Access-Request

code field packet type

accounting

and dynamic IP addressing
classifying user sessions
duplicate or deleted records
Failure-to-start records in
overview of configuration tasks
RADIUS
sample records in
setting up on per-user basis
setting up system-wide values
Start records
starting RADIUS daemon
Stop records
troubleshooting
using SNMP to specify primary accounting server

Accounting-Request

code field packet type

Accounting-Response

code field packet type

Acct-Authentic (45)

description/usage of
Start records, in
Stop records, in

Acct-Delay-Time (41)

description/usage of
Failure-to-start records, in
Start records, in
Stop records, in

Acct-Input-Octets (42)

description/usage of
Stop records, in

Acct-Input-Packets (47)

description/usage of
Stop records, in

Acct-Output-Octets (43)

description/usage of
Stop records, in

Acct-Output-Packets (48)

description/usage of
Stop records, in

Acct-Session-Id (44)

Ascend-Change-Filters-Request attribute
Ascend-Disconnect-Request attribute
description/usage of
disconnect-request attribute
Failure-to-start records, in
filter-change attribute
Start records, in
Stop records, in

Acct-Session-Time (46)

description/usage of
Stop records, in

Acct-Status-Type (40)

description/usage of
Failure-to-start records, in
Start records, in
Stop records, in

ACE authentication


ACE password


ActivCard


Answer-Defaults profile

parameters and analogous attributes

arguments

Ascend-IP-Pool-Definition
Ascend-IP-Pool-Definition (217)
Ascend-IPX-Route (174)
Framed-Route (22)
list of radiusd

Ascend Tunnel Management Protocol (ATMP)

Ascend unit as multimode agent
between two IP networks
configured in foreign agent's ATMP profile
connections
described
RADIUS attributes for
router and gateway modes for
set to bypass foreign agent

Ascend-Access-Event-Request

code field packet type

Ascend-Access-Event-Response

code field packet type

Ascend-Access-New-Pin

code field packet type

Ascend-Access-Next-Code

code field packet type

Ascend-Add-Seconds (240)

Access-Accept attribute
description/usage of
Dynamic Bandwidth Allocation (DBA) attribute

Ascend-ARA-PW (181)

Access-Accept attribute
description/usage of

Ascend-Ara-PW (181)

AppleTalk attribute

Ascend-Assign-IP-Pool (218)

Access-Accept attribute
AppleTalk attribute
description/usage of
IP address pool attribute

Ascend-Authen-Alias (203)

Access-Accept attribute
description/usage of
specifying the Ascend unit's name and password

Ascend-Backup (176)

Access-Accept attribute
description/usage of
nailed-up attribute

Ascend-BACP-Enable (133)

Access-Accept attribute
description/usage of

Ascend-Base-Channel-Count (172)

Access-Accept attribute
description/usage of
Dynamic Bandwidth Allocation (DBA) attribute

Ascend-Billing-Number (249)

Access-Accept attribute
description/usage of
outgoing call attribute

Ascend-Callback (246)

Access-Accept attribute
callback attribute
description/usage of

Ascend-Call-By-Call (250)

Access-Accept attribute
description/usage of
outgoing call attribute
settings

Ascend-Call-Filter (243)

Access-Accept attribute
Ascend-Change-Filters-Request attribute
description/usage of
filter-change attribute

Ascend-Call-Type (177)

Access-Accept attribute
description/usage of
Frame Relay profile attribute
Nailed/MPP attribute
nailed-up attribute

Ascend-Client-Assign-DNS (137)

Access-Accept attribute
description/usage of
DNS server attribute

Ascend-Client-Gateway (132)

Access-Accept attribute
description/usage of

Ascend-Client-Primary-DNS (135)

Access-Accept attribute
description/usage of
DNS server attribute

Ascend-Client-Secondary-DNS (136)

Access-Accept attribute
description/usage of
DNS server attribute

Ascend-Connect-Progress (196)

codes
description/usage of
Failure-to-start records, in
Stop records, in

Ascend-Data-Filter (242)

Access-Accept attribute
Ascend-Change-Filters-Request attribute
description/usage of
filter-change attribute

Ascend-Data-Rate (197)

description/usage of
Failure-to-start records, in
Stop records, in

Ascend-Data-Svc (247)

Access-Accept attribute
description/usage of
Frame Relay profile attribute
outgoing call attribute

Ascend-DBA-Monitor (171)

Access-Accept attribute
description/usage of
Dynamic Bandwidth Allocation (DBA) attribute

Ascend-Dec-Channel-Count (237)

Access-Accept attribute
description/usage of
Dynamic Bandwidth Allocation (DBA) attribute

Ascend-Dial-Number (227)

Access-Accept attribute
callback attribute
description/usage of
digits
non-accounting attribute in Start or Stop record
non-call-logging attribute in Start or Stop record
outgoing call attribute

Ascend-Dialout-Allowed (131)

Access-Accept attribute
description/usage of

Ascend-Disconnect-Cause (195)

codes
description/usage of
Failure-to-start records, in
Stop records, in

Ascend-Event-Type (150)

Ascend-Access-Event-Request attribute
Ascend-Access-Event-Response attribute
description/usage of
Stop records, in

Ascend-Expect-Callback (149)

Access-Accept attribute

Ascend-First-Dest (189)

Access-Accept attribute
description/usage of
Stop records, in

Ascend-Force-56 (248)

Access-Accept attribute
attribute limiting access
description/usage of

Ascend-FR-Circuit-Name (156)

Access-Accept attribute
description/usage of
Frame Relay user profile attribute

Ascend-FR-DCE-N392 (162)

Access-Accept attribute
description/usage of
Frame Relay profile attribute

Ascend-FR-DCE-N393 (164)

Access-Accept attribute
description/usage of
Frame Relay profile attribute

Ascend-FR-Direct (219)

Access-Accept attribute
description/usage of
Frame Relay user profile attribute

Ascend-FR-Direct-DLCI (221)

Access-Accept attribute
description/usage of
Frame Relay user profile attribute

Ascend-FR-Direct-Profile (220)

Access-Accept attribute
description/usage of
Frame Relay user profile attribute

Ascend-FR-DLCI (179)

Access-Accept attribute
description/usage of
Frame Relay user profile attribute

Ascend-FR-DTE-N392 (163)

Access-Accept attribute
description/usage of
Frame Relay profile attribute

Ascend-FR-DTE-N393 (165)

Access-Accept attribute
description/usage of
Frame Relay profile attribute

Ascend-FR-Link-Mgt (160)

Access-Accept attribute
description/usage of
Frame Relay profile attribute

Ascend-FR-N391 (161)

Access-Accept attribute
description/usage of
Frame Relay profile attribute

Ascend-FR-Nailed-Grp (158)

Access-Accept attribute
description/usage of
Frame Relay profile attribute

Ascend-FR-Profile-Name (180)

Access-Accept attribute
description/usage of
Frame Relay user profile attribute

Ascend-FR-T391 (166)

Access-Accept attribute
description/usage of
Frame Relay profile attribute

Ascend-FR-T392 (167)

Access-Accept attribute
description/usage of
Frame Relay profile attribute

Ascend-FR-Type (159)

Access-Accept attribute
description/usage of
Frame Relay profile attribute

Ascend-FT1-Caller (175)

Access-Accept attribute
description/usage of
Nailed/MPP attribute
nailed-up attribute

Ascend-Group (178)

Access-Accept attribute
description/usage of
Nailed/MPP attribute
nailed-up attribute

Ascend-History-Weigh-Type (239)

Access-Accept attribute
description/usage of
Dynamic Bandwidth Allocation (DBA) attribute

Ascend-Home-Agent-IP-Addr (183)

description/usage of
Stop records, in

Ascend-Home-Agent-Password (184)

Access-Accept attribute
ATMP connection attribute
description/usage of

Ascend-Home-Agent-UDP-Port (186)

Access-Accept attribute
description/usage of
non-accounting attribute in Stop record
non-call-logging attribute in Stop record

Ascend-Home-Network-Name (185)

Access-Accept attribute
ATMP connection attribute
description/usage of
non-accounting attribute in Stop record
non-call-logging attribute in Stop record

Ascend-Host-Info (252)

Access-Accept attribute
attribute for message text and host list
description/usage of

Ascend-Idle-Limit (244)

Access-Accept attribute
description/usage of
time limit and idle connection attribute

Ascend-IF-Addr

Access-Accept attribute
description/usage of
interface-based routing attribute

Ascend-IF-Netmask (153)

Access-Accept attribute
description/usage of
interface-based routing attribute

Ascend-Inc-Channel-Count (236)

Access-Accept attribute
description/usage of
Dynamic Bandwidth Allocation (DBA) attribute

Ascend-IP-Direct (209)

Access-Accept attribute
description/usage of

Ascend-IP-Pool-Definition (217)

Access-Accept attribute
arguments
description/usage of
IP address pool attribute

Ascend-IPX-Alias (224)

Access-Accept attribute
description/usage of
IPX routing attribute

Ascend-IPX-Peer-Mode (216)

Access-Accept attribute
description/usage of
IPX routing attribute

Ascend-IPX-Route (174)

Access-Accept attribute
arguments
description/usage of

Ascend-Link-Compression (233)

Access-Accept attribute
description/usage of
PPP, MP, and MP+ attribute

Ascend-Maximum-Call-Duration (125)

Access-Accept attribute
description/usage of
time limit and idle connection attribute

Ascend-Maximum-Channels (235)

Access-Accept attribute
description/usage of
Dynamic Bandwidth Allocation (DBA) attribute

Ascend-Maximum-Time (194)

Access-Accept attribute
description/usage of
time limit and idle connection attribute

Ascend-Menu-Item (206)

Access-Accept attribute
custom menu attribute
description/usage of

Ascend-Menu-Selector (205)

Access-Accept attribute
description/usage of
input prompt attribute

Ascend-Metric (225)

Access-Accept attribute
description/usage of

Ascend-Minimum-Channels (173)

Access-Accept attribute
description/usage of
Dynamic Bandwidth Allocation (DBA) attribute

Ascend-MPP-Idle-Percent (254)

Access-Accept attribute
description/usage of
time limit and idle connection attribute

Ascend-Multicast-Client (155)

Access-Accept attribute
description/usage of
multicast forwarding attribute

Ascend-Multicast-GRP-Leave-Delay

Access-Accept attribute
description/usage of
multicast forwarding attribute

Ascend-Multicast-Rate-Limit (152)

Access-Accept attribute
description/usage of
multicast forwarding attribute

Ascend-Multilink-ID (187)

Access-Accept attribute
description/usage of
Stop records, in

Ascend-Number-Sessions (202)

Ascend-Access-Event-Request attribute
Ascend-Access-Event-Response attribute
description/usage of
Stop records, in

Ascend-Num-In-Multilink (188)

Access-Accept attribute
description/usage of
Stop records, in

Ascend-Password-Expired

code field packet type

Ascend-PPP-Address (253)

Access-Accept attribute
description/usage of
PPP, MP, and MP+ attribute

Ascend-PPP-Async-Map (212)

Access-Accept attribute
description/usage of
PPP, MP, and MP+ attribute

Ascend-PPP-VJ-1172 (211)

Access-Accept attribute
description/usage of
PPP, MP, and MP+ attribute

Ascend-PPP-VJ-Slot-Comp (210)

Access-Accept attribute
description/usage of
PPP, MP, and MP+ attribute

Ascend-Preempt-Limit (245)

Access-Accept attribute
description/usage of
time limit and idle connection attribute

Ascend-Pre-Input-Octets (190)

Access-Accept attribute
description/usage of
Stop records, in

Ascend-Pre-Input-Packets (192)

Access-Accept attribute
description/usage of
Stop records, in

Ascend-Pre-Output-Octets (191)

Access-Accept attribute
description/usage of
Stop records, in

Ascend-Pre-Output-Packets (193)

Access-Accept attribute
description/usage of
Stop records, in

Ascend-PreSession-Time (198)

description/usage of
Failure-to-start records, in
Stop records, in

Ascend-Primary-Home-Agent (129)

Access-Accept attribute
ATMP connection attribute
description/usage of

Ascend-PRI-Number-Type (226)

Access-Accept attribute
description/usage of
outgoing call attribute

Ascend-PRI-Number-Type (226) settings


Ascend-PW-Expiration (21)

Access-Accept attribute
description/usage of
password expiration attribute

Ascend-PW-Lifetime (208)

Access-Accept attribute
description/usage of
password expiration attribute

Ascend-Receive-Secret (215)

Access-Accept attribute
Cache-Token attribute
description/usage of

Ascend-Remote-Addr (154)

Access-Accept attribute
description/usage of
interface-based routing attribute

Ascend-Remove-Seconds (241)

Access-Accept attribute
description/usage of
Dynamic Bandwidth Allocation (DBA) attribute

Ascend-Require-Auth (201)

Access-Accept attribute
called-number authentication using the called-party number only
CLID authentication using caller ID only
description/usage of
external authentication after called-number authentication
external authentication after CLID authentication
requesting PAP, CHAP, or MS-CHAP after CLID authentication

Ascend-Route-IP (228)

Access-Accept attribute
AppleTalk attribute
description/usage of

Ascend-Route-IPX (229)

Access-Accept attribute
description/usage of
IPX routing attribute

Ascend-Secondary-Home-Agent (130)

Access-Accept attribute
ATMP connection attribute
description/usage of

Ascend-Seconds-Of-History (238)

Access-Accept attribute
description/usage of
Dynamic Bandwidth Allocation (DBA) attribute

Ascend-Send-Auth (231)

Access-Accept attribute
description/usage of
requesting authentication protocol

Ascend-Send-Passwd (232)

Access-Accept attribute
Access-Request attribute
callback attribute
description/usage of
requesting authentication protocol
specifying the Ascend unit's name and password

Ascend-Send-Secret (214)

Access-Accept attribute
Access-Request attribute
callback attribute
description/usage of
requesting authentication protocol
specifying the Ascend unit's name and password

Ascend-Session-Svr-Key (151)

Ascend-Change-Filters-Request attribute
Ascend-Disconnect-Request attribute
description/usage of
disconnect-request attribute
filter-change attribute
Start records, in

Ascend-Shared-Profile-Enable (128)

Access-Accept attribute
description/usage of

Ascend-Target-Util (234)

Access-Accept attribute
description/usage of
Dynamic Bandwidth Allocation (DBA) attribute

Ascend-Third-Prompt (213)

Access-Accept attribute
description/usage of

Ascend-Token-Expiry (204)

Access-Accept attribute
Cache-Token attribute
description/usage of

Ascend-Token-Idle (199)

Access-Accept attribute
Cache-Token attribute
description/usage of

Ascend-Token-Immediate (200)

Access-Accept attribute
Cache-Token attribute
description/usage of

Ascend-Transit-Number (251)

Access-Accept attribute
description/usage of
outgoing call attribute

Ascend-TS-Idle-Limit (169)

Access-Accept attribute
description/usage of
idle-timer attribute

Ascend-TS-Idle-Mode (170)

Access-Accept attribute
description/usage of
idle-timer attribute

Ascend-User-Acct-Base (142)

description/usage of
Start records, in
Stop records, in

Ascend-User-Acct-Host (139)

description/usage of
Start records, in
Stop records, in

Ascend-User-Acct-Key (141)

description/usage of
Start records, in
Stop records, in

Ascend-User-Acct-Port (140)

description/usage of
Start records, in
Stop records, in

Ascend-User-Acct-Time (143)

description/usage of
Start records, in
Stop records, in

Ascend-User-Acct-Type (138)

description/usage of
Start records, in
Stop records, in

Ascend-Xmit-Rate (255)

description/usage of
Stop records, in

ASCII users file

replacing expired password for
running RADIUS daemon with

async control character map

specified for PPP session

AT&T settings


ATMP profile

configuring foreign agent's
configuring home agent's

Attribute list

RADIUS packet field

attributes

Access-Accept
Access-Reject
Access-Request
accounting
ACE authentication
alphabetical order, in
AppleTalk
ATMP
Cache-Token
call logging
called-number authentication
CLID authentication
configuring a PPP connection in RADIUS
cross reference of parameters and analogous
disconnect request
Dynamic Bandwidth Allocation (DBA)
Failure-to-start records, in
filter change
Frame Relay profile
interface-based routing
IP address pool
IPX routing
limiting access to devices and services
limiting devices and services
listing of RADIUS
multicast forwarding
Nailed/MPP
nailed-up
numerical order, in
outgoing call
PAP-Token authentication
remote users
specifying authentication protocol
specifying time limit and idle connection
time limit and idle connection

authentication

Cache-Token
called-number
CHAP
CLID
described
foreign agent via RADIUS
MS-CHAP
PAP
PAP-Token-CHAP
process of RADIUS
specifying protocol for
terminal-server
token-card
troubleshooting

Authenticator

RADIUS packet field

average line utilization (ALU)

B


Backoff queue error message


BAD AUTHENTICATOR error message


bandwidth

managing

builddbm file

C


Cache-Token authentication


CALC_DIGEST error message


call filters, see filters


call logging

and dynamic IP addressing
Failure-to-start records in
overview of configuration tasks
sample records in
setting up system-wide values
Start records
starting RADIUS daemon
Stop records

callback attributes


called-number authentication

using external authentication after
using name, password, and the called-party number

Caller-Id (31)

Access-Accept attribute
Access-Request attribute
CLID authentication using caller ID only
CLID authentication using name, password, and caller ID
description/usage of
external authentication after CLID authentication
non-accounting attribute in Start or Stop record
non-call-logging attribute in Start or Stop record
requesting PAP, CHAP, or MS-CHAP after CLID authentication

calls

answering process described
Ascend-Dial-Number digits for
disconnecting
setting up outgoing

Challenge-Response (3)

Access-Request attribute
description/usage of

Change-Filter-Request

code field packet type

Change-Filter-Request-ACKed

code field packet type

Change-Filter-Request-NAKed

code field packet type

Change-Password (17)

Access-Accept attribute
Access-Password-Request attribute
description/usage of

channels

restricting users to specific

CHAP authentication


CHAP UNIX FAILURE

error message

circuit connections

described

Class (25)

Access-Accept attribute
Access-Request attribute
description/usage of
non-accounting attribute in Start or Stop record
non-call-logging attribute in Start or Stop record

CLID authentication

requesting PAP, CHAP, or MS-CHAP after
using caller ID only
using external authentication after
using name, password, and caller ID

Client-Port-DNIS (30)

Access-Accept attribute
Access-Request attribute
attribute limiting access
called-number authentication using name, password, and the called-party number
called-number authentication using the called-party number only
description/usage of
external authentication after called-number authentication
non-accounting attribute in Start or Stop record
non-call-logging attribute in Start or Stop record

clients file

configuring
creating
format of

Code

RADIUS packet field

configuration

of access to specific DNS servers
of Ascend unit for RADIUS
of ATMP over IP network
of default routes on a per-user basis
of Dynamic Bandwidth Allocation (DBA)
of filter changes
of generic filter
of interface-based routing in RADIUS
of IP address pool in RADIUS
of IP filter
of IP redirection
of MP connection in RADIUS
of MP+ connection in RADIUS
of multicast forwarding
of Nailed/MPP connection in RADIUS
of nailed-up connection in RADIUS
of NetWare LANs
of PPP connection in RADIUS
of static IP routes
of static IPX routes

Connection profile

configured for nailed-up connection to home network
MBONE, and
parameters and analogous attributes

connections

ATMP
circuit
dial-in client
direct
enabling Telnet, TCP, and Rlogin
gateway
host route
interface-based routing
IPX routing
MP
MP+
Nailed/MPP
nailed-up
PPP
router
specifying time limit for idle
terminal-server

CryptoCard


custom menu

configured for terminal-server connection

D


data compression

PPP, MP, or MP+ link

data filters, see filters


DBM database

creating
starting RADIUS daemon for

DCE attributes


DES Gold


DES Silver


detail file


DICT_VAL_FIND error message


dictionary file

described
format of
installing

DigiPass


digital modems

controlling access to

direct connections

described

Disconnect-Request

code field packet type

Disconnect-Request-ACKed

code field packet type

Disconnect-Request-NAKed

code field packet type

disconnects

setting up

DNS

configuring access to specific servers

DTE attributes


Dynamic Bandwidth Allocation (DBA)

configuring

dynamic routes

E


Enigma Logic server

Cache-Token settings for
PAP-Token-CHAP settings for

error messages

backoff queue
log file

Examples

MP connection

External-Auth profile

parameters and analogous attributes

F


Failure-to-start records


fields

RADIUS packets, in

files

clients
detail
dictionary
flat ASCII users
logfile
radiusd
radiusd.dbm
used by RADIUS
users

filters

call filters for reducing connection costs
comparison to packets
configuring changes for
configuring generic
configuring IP
data filters for dropping packets
generic call filter entries
generic data filter entries
generic filters
IP call filter entries
IP data filter entries
IP filters
IP security
setting up

foreign agent

Ascend unit as
configured
setting up ATMP to bypass

Frame Relay connections

setting up in RADIUS user profile
using the Ascend unit as a Frame Relay concentrator

Framed-Address (8)

Access-Accept attribute
AppleTalk attribute
description/usage of
non-accounting attribute in Start or Stop record
non-call-logging attribute in Start or Stop record
outgoing call attribute
PPP, MP, and MP+ attribute

Framed-Compression (13)

Access-Accept attribute
description/usage of
PPP, MP, and MP+ attribute

Framed-IP-Address (8)

Ascend-Change-Filters-Request attribute
Ascend-Disconnect-Request attribute
disconnect-request attribute
filter-change attribute

Framed-MTU (12)

Access-Accept attribute
description/usage of
Frame Relay profile attribute
PPP, MP, and MP+ attribute

Framed-Netmask (9)

Access-Accept attribute
AppleTalk attribute
description/usage of
outgoing call attribute
PPP, MP, and MP+ attribute

Framed-Protocol (7)

Access-Accept attribute
Access-Request attribute
AppleTalk attribute
description/usage of
Frame Relay user profile attribute
nailed-up attribute
non-accounting attribute in Start or Stop record
non-call-logging attribute in Start or Stop record
PPP attribute
PPP, MP, and MP+ attribute
requesting authentication protocol
requesting PAP, CHAP, or MS-CHAP after CLID authentication

Framed-Route (22)

Access-Accept attribute
arguments
description/usage of

Framed-Routing (10)

Access-Accept attribute
description/usage of

Framed-Routing settings

G


gateway connections

described

gateway mode

configuring ATMP

generic filter

configuring
syntax elements for

H


home agent

Ascend unit as
configured

host list

setting up terminal-server

host route connections

I


Identifier

RADIUS packet field

idle timer

setting up terminal-server

input prompt

configured for terminal-server connection

installing RADIUS


interface-based routing connections

configuration for
RADIUS attributes for
setting up

IP addresses

defined for dynamic assignment
pool for a single Ascend unit
requiring that a caller accept
specifying Ascend unit's
specifying caller's

IP call filter

syntax elements for

IP data filter

syntax elements for

IP filter

configuring
syntax elements for

IP networks

and ATMP
ATMP between two

IP routing

configuring redirection of
configuring static routes
enabling
how the routing table works
interface based
introduction
specifying default routes on a per-user basis
specifying RIP behavior
types of routes

IP-Interface profile

parameters and analogous attributes

IP-Route profile

parameters and analogous attributes

IPX routing

attributes

IPX routing connections

setting up

IPX static routes

configuring

L


Length

RADIUS packet field

lines

restricting users to specific

logfile

creating
described

Login-Host (14)

Access-Accept attribute
description/usage of
Telnet, TCP, and Rlogin attribute

Login-Service (15)

Access-Accept attribute
description/usage of
Telnet, TCP, and Rlogin attribute

Login-TCP-Port (16)

Access-Accept attribute
Access-Reject attribute
description/usage of
Telnet, TCP, and Rlogin attribute

M


MCI settings


message text

setting up terminal-server

mobile client

configuring incoming RADIUS user profile for

MP connection

configured in RADIUS
example of
optional configuration steps
required configuration steps

MP+ connection

configured in RADIUS
optional configuration steps
required configuration steps

MS-CHAP authentication


multicast forwarding

setting up

multipath routes

N


Nailed/MPP connection

configured in RADIUS
setting up

nailed-up connection

configuring to home network
setting up

NAS-Identifier (4)

Access-Request attribute
Ascend-Access-Event-Request attribute
Ascend-Access-Event-Response attribute
description/usage of
non-accounting attribute in Start or Stop record
non-call-logging attribute in Start or Stop record

NAS-Port (5)

Access-Request attribute
description/usage of
non-accounting attribute in Start or Stop record
non-call-logging attribute in Start or Stop record

NAS-Port-Type (61)

Access-Request attribute
attribute limiting access
description/usage of
non-accounting attribute in Start or Stop record
non-call-logging attribute in Start or Stop record

non-accounting attributes in Start and Stop records


non-call-logging attributes in Start and Stop records

O


optional configuration for RADIUS


outgoing calls

setting up

P


packet filters, see filters


packets

code field types in RADIUS
fields in RADIUS
formats of RADIUS
specifying maximum number of bytes in

PAP authentication

described

PAP-Token authentication


PAP-Token-CHAP authentication


parameters

cross reference of attributes and

Password (2)

Access-Password-Request attribute
Access-Request attribute
ACE authentication attribute for remote users
AppleTalk attribute
Ascend-Access-Event-Request attribute
attribute for message text and host list
Cache-Token attribute
called-number authentication using name, password, and the called-party number
called-number authentication using the called-party number only
CLID authentication using caller ID only
CLID authentication using name, password, and caller ID
description/usage of
external authentication after called-number authentication
external authentication after CLID authentication
Frame Relay profile attribute
Frame Relay user profile attribute
nailed-up attribute
outgoing call attribute
PAP-Token attribute
PPP, MP, and MP+ attribute
requesting authentication protocol
requesting PAP, CHAP, or MS-CHAP after CLID authentication
specifying the Ascend unit's name and password
Telnet, TCP, and Rlogin attribute

passwords

ACE
changing expired
changing nonexpired
SAFEWORD
specifying expiration for

ports

restricting user to specific

PPP connection

configured in RADIUS
optional configuration steps
required configuration steps

PPP connections

example configuration

profile, pseudo-user


Profiles

Connection
IP-Options

profiles

configuring Connection to home network
configuring foreign agent's ATMP
configuring incoming RADIUS for mobile client
configuring multipath static IP routes in pseudo-user
configuring outgoing RADIUS to foreign agent
configuring outgoing RADIUS to home agent
configuring static IP routes in dial-in user
configuring static IP routes in pseudo-user
cross reference of parameters/attributes and
setting up Frame Relay link in RADIUS user
specifying Frame Relay connections

protocols

ATMP
specifying authentication

R


RADIUS

accounting
applications
authentication
configuring distinct ID sequences for packet IDs
configuring MP connection in
configuring MP+ connection in
configuring multicast forwarding in
configuring Nailed/MPP connection in
configuring nailed-up connection in
configuring PPP connection in
configuring the Ascend unit for
files used in
fine-tuning interaction with Ascend unit
installing
packet formats in
requirements for
restrictions to specific shelves, ports, lines, and channels
See also attributes, parameters
setting up outgoing calls in
specifying disconnects in
specifying timeout
specifying timeout message
starting
troubleshooting

RADIUS user profile

configuring incoming for mobile client
configuring outgoing to foreign agent
configuring outgoing to home agent

radiusd file


radiusd.dbm command


radiusd.dbm file


Reply-Message (18)

Access-Accept attribute
Access-Reject attribute
attribute for message text and host list
description/usage of

required configuration for RADIUS


Rlogin connection

enabling

router connections


router mode

configuring ATMP

routes

dynamic
multipath
static

S


SafeWord MultiSync


SAFEWORD password


SafeWord SofToken


SecureNet Key


Security Dynamics ACE/Server

PAP-Token for

servers

linked to both sides of IPX

slot compression

turning off

SNMP

specifying the primary RADIUS authentication server

Sprint settings


Start records


starting RADIUS


static routes


Stop records


Synchronous connection

T


T1 profile

parameters and analogous attributes

TCP connection

enabling

TCP/IP header compression

turning on

Telnet connection

enabling

terminal-server authentication


terminal-server connection

configuring custom menu and input prompt for
enabling Telnet, TCP, and Rlogin
setting up
setting up idle timer
setting up message text and host list

Terminal-Server profile

parameters and analogous attributes

token-card authentication

setting up
setting up Cache-Token
setting up PAP-Token
setting up PAP-Token-CHAP

troubleshooting

accounting problems
authentication

U


U.S Interexchange Carrier (IEC)


UNI-DCE interface

described

UNI-DTE interface

described

UNIX DBM database

running RADIUS with

User-Name (1)

Access-Password-Request attribute
Access-Request attribute
ACE authentication attribute for remote users
AppleTalk attribute
Ascend-Change-Filters-Request attribute
Ascend-Disconnect-Request attribute
attribute for message text and host list
Cache-Token attribute
called-number authentication using name, password, and the called-party number
called-number authentication using the called-party number only
CLID authentication using caller ID only
CLID authentication using name, password, and caller ID
description/usage of
disconnect-request attribute
external authentication after called-number authentication
external authentication after CLID authentication
filter-change attribute
Frame Relay profile attribute
Frame Relay user profile attribute
nailed-up attribute
non-accounting attribute in Start or Stop record
non-call-logging attribute in Start or Stop record
outgoing call attribute
PAP-Token attribute
PPP, MP, and MP+ attribute
requesting authentication protocol
requesting PAP, CHAP, or MS-CHAP after CLID authentication
specifying the Ascend unit's name and password
Telnet, TCP, and Rlogin attribute

users file

creating
format of
running RADIUS with flat ASCII

User-Service (6)

Access-Accept attribute
Access-Request attribute
attribute for message text and host list
attribute limiting access
description/usage of
Frame Relay profile attribute
Frame Relay user profile attribute
nailed-up attribute
outgoing call attribute
PPP, MP, and MP+ attribute
requesting authentication protocol
requesting PAP, CHAP, or MS-CHAP after CLID authentication
specifying the Ascend unit's name and password
Telnet, TCP, and Rlogin attribute

V


Virtual Private Network (VPN)

W


WatchWord


WRONG NAS ADDRESS

error message


[Top][Contents][Prev][Search]

techpubs@eng.ascend.com

Copyright © 1998, Ascend Communications, Inc. All rights reserved.