| |
|
|
show ip bgp paths
Displays received BGP path information in the database.
Syntax: show ip bgp paths
Description: Use the show ip bgp paths command to display all the BGP paths in the database.
Factory Default: None.
Command Mode: Executive and privileged.
Example: The following is sample output from the show ip bgp paths command:
router#show ip bgp paths
Hash Refcount Metric Path
2 7 - i
1 1 - i
3 1 - 871 e
The following table describes the fields in the display:
Table 4-10. Fields Displayed by show ip bgp paths Field Description Hash
Hash bucket where path is stored.
Refcount
Number of routes using that path.
Metric
The Multi Exit Discriminator metric for the path.
Path
The autonomous system path for the route.
Origin codes
Identifies the origin of the entry. Valid values are listed below.
- i - Entry originated in IGP. Entry was advertised by the network route configuration command.
- e - Entry originated in EGP.
- ? - Entry origin is not clear or is incomplete. Reachability information learned from some other source (usually indicates route is redistributed from IGP into BGP.
Related Commands: show ip bgp
show ip bgp neighbors
show ip bgp peer-group
show ip bgp summary
| |
|
|
Copyright © 2004
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: BGP_Nd.fm
HTML File Name: BGP_Nd56.html
Last Updated: 05/10/04 at 16:36:55